HT-85415 Boot Washer/Hand washing and Hand disinfection machine Hygiene station machine for Food workshop: Hygiene station machine is mainly suitable for food manufacturing enterprises. This product adopts one-stop overall solution to clean and disinfect function design, mainly made of stainless steel 304 material, in line with food industry standards. This product features a fully automatic sensing design that allows personnel to operate without contact during the entire process, avoiding cross-contamination during the process. The main functions are: induction to soap, induction washing, induction hand disinfection, induction start boot cleaning, etc. This equipment is equipped with a three-roll gate, which is released after forced disinfection of hands, one-stop solution for personnel's hand cleaning With disinfection, cleaning and disinfection of boots. Features: 1 One-stop overall solution for cleaning and disinfection function design 2 Full-automatic induction start design, avoid contact and avoid cross-contamination 3. Hand cleansing function: induction to soap, induction washing, induction dry hand, induction hand disinfection 4. Boots clean function: induction start cleaning boots, optional external soap pot 5. Three-roll gate function: It can be released by forced hands disinfection. Working principle: 1. Use a motor-driven cleaning roller brush to clean the boots and soles. 2. The user stands on the cleaning table and uses a brush to turn the sole to achieve a clean effect. 3. The hand is clean and the whole process is activated and stops automatically. Installation conditions: 1. The installation site needs to be leveled, placed directly, and used indoors. 2. Need water inlet and drain pipe connection 3. Working voltage AC220 power supply Size and Parameter:
Specifications
Model | HT-85415 |
Product | Boot Washer and Hand washing/disinfection machine |
Originl of place | China |
Electric control | Integration: Omron / Weidmuller / Chint |
Cleaning mode / inlet water temperature | Circulating/washing (10-30C) |
The main function | Boot cleaning, sole cleaning, hand sanitization, tripod access gate |
Materail of brush | Nylon |
Water inlet pressure | Electromagnetic valve/8 bar |
Water inlet(DN/Thread Specification) | DN20/3/4” |
Water level controller(Voltage) | Float valve DC24V |
Drainage performance | Floor drain straight |
Start/stop mode | Start by sensor, will stop in 30-60s |
Voltage | AC220V,50HZ.1PH |
Motor power | 6sets x 120W |
Hand disinfection | 160W |
Rated total power | 1100W |
Material | SS304 |
Size | L3800*W1100*H1800mm |